What will happen to the R Angle of pvc electronic packaging tube

pvc electronic packaging pipe is produced by extrusion mold, because of mold process reasons, the diamond corner of the packaging pipe is not square, but will have a circular R Angle.

Of course, the size of this R Angle is exquisite, which needs to be determined according to the scale of the pvc electronic packaging pipe, and the R Angle is also divided into internal R Angle and external R Angle. Generally speaking, pvc electronic packaging pipe mouth size is below 10 mm, the inner R Angle size is controlled in the radius of 0.3mm, the scale is between 10 and 20 mm, the inner R Angle is 0.3, the outer R is called to 0.5, the specification is 25 to 40 mm, the inner 0.4 outside 0.6, and the inner R Angle above 40 mm is 0.5, The outer R Angle is between 0.8 and 1.0.

The size of the R Angle decision is summed up by the production experience of pvc electronic packaging pipe for more than ten years, and it has focused on the production of customized pvc electronic packaging pipe for 13 years, and has continuously improved the production process in the accumulation to create excellent packaging pipe.