Auto terminals, plug-in manufacturers

How much do you know about the extrusion process of electronic packaging tubes?

The use of electronic packaging tube components manufacturers have also increased, for the transparent electronic packaging tube production process, I briefly introduce it!

The electronic packaging pipe uses the extrusion process, first look at the size of the pipe and determine the speed of its production, by changing the speed of the screw to achieve. If the speed is too fast, the retention time will be too short to prepare a uniform, well-stirred melt, and the resulting pipe wall thickness will be uneven. Then set the temperature of the melting machine and let the machine preheat, in which the heat source of the plastic comes from the friction heat generated by the motor to overcome the resistance of the viscous melt. The plastic particles are poured into the machine to heat and melt, the plastic is attached to the cylinder in the machine, the screw in the machine scratches the plastic in the cylinder to the screw, and pushes forward, but also to control the pressure of the screw, the pressure is too large may cause accidents. Then install a set of molds that can adapt to high temperature in the motor melting outlet, so that the melted plastic is preliminarily shaped, so that it is preliminarily cooled in the air, after the setting mold is cooled by tap water, the plastic is basically shaped, and then the machine is fixed and transmitted to the cutting area.

The extrusion process is roughly like this, the electronic packaging tube is also extrusion production, the division focuses on the electronic component manufacturers to customize the electronic packaging tube, the length, shape and size can be customized, do more suitable for your pipe.